Se-Kure Controls LE PLUS Betriebsanleitung PDF herunterladen (Seite 6)

Installation Instructions for the

ME Jr. plus 2 Alarm System

SK-800KME Series

SK-3690

(Optional) “Where it’s At Light”

SK-807ME

ME Jr. plus 2 (8) Port Splitter Box

SK-80108ME

ME Jr. plus 2 (8) Port Strip

SK-809

Telephone Modular

“End Plug”

SK-800KME

ME Jr. plus 2 Alarm Module

Battery Installation:

1. Remove the screw that restricts the battery

door from opening using a phillips head

screwdriver as shown in Fig. 1.

2. Insert the key and turn it to the disarmed

position (the key cannot be removed in the

disarmed position).

Note: The battery door will not open without the

key in the lock and in the disarmed position.

3

. Remove the battery door.

4

. Before installing batteries, plug the (SK-195)

AC/DC Power Supply into the Alarm Module

jack marked Pwr. Input as shown in Fig. 2.

5

. Install (4) fresh “C” Cell Alkaline batteries

following (+) and (-) polarity shown in Fig. 3.

VERY IMPORTANT! When installing batteries,

always follow the polarity indicated on the

battery holder.

6

. Close the door as shown in Fig. 4. The horn

will “Double Chirp” until the door is securely

closed.

7

. Replace the battery door retaining screw as

shown in Fig. 5. (If the key is in the disarmed

position for 1-1/2 minutes, the horn will

“Single Chirp” every 15 seconds to indicate

that the unit is in the disarmed mode.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

SK-847-x

Extension

Connects

Alarm Module

to Splitters &

Strips &

Splitters to

Splitters

ME Jr. Terminals

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare